Quick: DarkSound by ByteBoosters

The Apple IIgshave GREAT audio capabilities with it’s Ensoniq 5503 DOC¬†– chip but there’s no connectors in the logic board for stereo output for speakers. So the DarkSound-card resolves that problem with simple, single board with connector to the logic board itself taking the signal and outputs it to external speakers/headphones or amplifier in Stereo.

settings_s
The pin settings in the card you can use are as of:
*HIGH – for non-amplifed speakers (direct 8ohm, 1.5mm plug)
*LOW – for headphones or amplified speakers (1.5mm plug)
*LINE – for external aplifer / home stereo-system (3.5mm plug)

The card itself is not slot dependent, as you can install it to any slot and it will maintain the internal slot/port settings.

It also features as digizer as it have input for the signal to be digized with software.

darksoundbybyteboostersappleiigsstereocard_smallTHE PACKAGE COMES WITH:
-The board itself with adapter cable connected (to logic board)
-Stereo adapter (1.5 mm -> 3.5 mm stereo)
-Extension cable (1.5mm male to female)
-Printed installation and user instructions

darksound_connected_side_small
Connector attached to logic board¬†. It’s a bit tight fight with the Apple IIgs 8MBRAM/ROM-card (a2heaven.com) but it did fit there just barely however.

darksound_connector_small
Bit tight but fits.

oma_kaiuttimetI attached the card to crappy-old-Creative 2.0 speakers but they work just ok for time being.

ByteBoosters also produce other products for Apple IIGS. Available is also 4MB and 8MB RAM-expansion cards. Both are tiny and very reasonably priced.

WHERE TO BUY?:
DarkSound IIGS
https://console5.com/store/darksound-apple-iigs-stereo-sound-card-and-digitizer-w-amplifier-line-out-2gs.html

8MB DarkRam IIGS
https://console5.com/store/byteboosters-8mb-darkram-apple-iigs-memory-expansion-card-2gs.html

4MB RAM-expansion IIGS
https://console5.com/store/byteboosters-4mb-xlp-apple-iigs-memory-expansion-board-2gs.html

(C) FinApple 2017.