Booti – card with Apple ///

booti_for_apple_iii_s

Booti – card by David Mutimer is nice small card (or two parted card) for Apple II. It is smartport/blockdevice card meaning you are able to use it as (ProDOS) HDD. It’s NOT a floppy emulator.

The support for Apple /// is based on Problock v0.0.4 beta by Robert Justice who also provided driver boot floppy images as well HDD images. See his github for more details (link at the end).

booti-card_apple_3_s

The card fits really nicely without any problems inside the Apple ///. Some cards like CFFA3000 and CFFA2 had their problems before. It’s very tiny card.

I installed the Booti – card to my “main” /// to see if would work in different scenarios and emulations (expect CP/M that i didn’t get around testing).

My setup:
-Softcard /// (#1)
-Titan /// plus (#2)
-Titan /// plus //e (#3)
-Booti (#4)
-Clock chip/batteries
-OnThree 512k RAM expansion

-Booti = Slot 4 + extention cable for USB – memory (get’s the USB – memory outside of the case, more convinient surely)
-Setup to Blockmode 

Robert is offering these images at his github:

selector.start_pb3.dsk – a Selector boot disk with the driver preloaded.
sos_selector_hd.zip – a 16mb po file for use with the above disk
bosboot_pb3.dsk – a bos boot disk with the driver preloaded
bos_cffa_32.hd – MAME hd file for CFFA2 with /BOS & /HOME.
bos.po.zip – a 16mb po file with BOS for use with BOOTI

configuration_menu_s

Files needed:

-Setup the Booti with “bos.po”- a 16mb po file with BOS for use with BOOTI
-Boot floppy “bosboot_pb3.dsk” – a BOS-boot disk with the driver preloaded.

The driver works with according to Robert:

-CFFA v1.3 – The CF Card needs to be formatted for Apple2 mode. This means 32mb partitions which are  problematic with SOS.
-CFFA v2 – Only tested with MAME emulation. The CF Card needs to be formatted for Apple2 mode. This means  32mb partitions which are problematic with SOS. . In MAME, if you use the option to mount a 16mb .2mg or .po image directly, then it works well.
-Booti – Tested with the card set to block mode
-CFFA3000 – Works ok booting Selector and sysutils, but will not work with BOS for some as yet undetermined reason
-Focus – Only tested with the MAME emulation

There is also cards like ClassicIDE that is basicly clone of the CFFA2. 

 

Setup/regular Apple ///

-Boot with Apple II emulation (48k) floppy (built-in)
-Boot Apple II floppy > break 
-Go to monitor > CALL -151
* 42:FF N CX0AG (where X=slot where booti card is installed)
-> Configuration menu
-> Choose the HDD image “bos.po” in this case
-Boot with boot floppy i.e. “bosboot_pb3.dsk” (make real floppy or use suitable emulator with adapter cable)

Setup with Titan cards installed:

-Boot with TITAN emulation floppy. 
-Boot BOOTI firwmware update disk in //e mode 
-BRUN FS (doesn’t work everytime for some reason)
-> Configuration menu
-> Choose HDD image

Or you can access the menu from monitor:

-Boot with TITAN emulation floppy.
-Start //e emulation > break
-Go to monitor > CALL -151
* 42:FF N CX0AG (where X=slot where the booti card is installed)
-> Configuration menu
-> Choose HDD image.

 

 

Apple /// mode:

hdd_working_s

I was able to boot the BOS-HDD image and load all software preinstalled to the image. This is really awesome solution compared to anything else! I am not fan of configuring partitions and formats to CF – cards..

 

Apple //e mode (Titan):

a3_total_replay_s

Under the Titan, Apple //e emumation i tested the recent brilliant collection of games, “Total Replay” and it worked as well! I just would need joystick installed to my emulation card in order to play the games.

 

What next?

Robert have shown videos where he is able to boot the HDD image *directly* from the USB-memory.  He’s developing custom ROM for the /// that will allow him to do just that. That is what have been in dreams of Apple /// user’s since 1980. Direct boot from HDD. Nice!

 

LINKS:

https://github.com/robjustice/Problock3
https://github.com/robjustice/Problock3/releases

 

Apple /// forever!
FinApple 2020 (c)